Luminor 1950 3 Days
The PAM00372 is a two-hand Luminor 1950 in a 47 mm polished steel case, shown at SIHH in 2011. It has a black engraved sandwich dial with tan luminous paint, gold-toned hands, a domed Plexiglas crystal, a sapphire caseback and the hand-wound P.3000 movement with three days of power reserve. It was conceived as the plain, time-only counterpart to the limited Luminor 1950 of 2002. Its dial recalls the vintage 6152, while its flat lugs and edged cushion case are closer to the 6152 and 6154 than to the 6152/1. The PAM00422 adds a seconds subdial and a sapphire crystal, and the PAM557 moves the crown to the left. Collectors look first at the crystal, the dial engraving and the case finish.

- Made
- from 2011dates approximate
- Seen in the library
- 2011–2019by years sellers state
- Case
- 47 mm · steelas sellers state
- Movement
- Calibre P3000hand-wound
- On record
- 38 listings53 photographs · 16 holders
Components
14 watches, oldest first, each straightened and cut the same way so that one row shows one component across them all. Chosen from 53 photographs on file for sharpness and for a face typical of the reference. A year marked c. is one its holder gives only roughly. Each picture is a detail cut from a listing photograph. Select the small mark in its corner for its year, its holder, a link to the listing it came from, and a way to report it.
Chronology
The literature gives only the 2011 presentation; it states no end of production, and the date a given watch was made is not stated.
Specification
| Case | 47 mm polished 316L steel cushion case with polished bezel; about 16 mm to 16.4 mm high; flat caseback |
| Crown guard | Brushed steel device protecting the crown, carrying trademark engraving |
| Crystal | Domed Plexiglas, 3 mm thick; sapphire caseback |
| Dial | Black sandwich dial with engraved Luminor Panerai text; tan luminous numerals and markers |
| Hands | Gold-toned hour and minute hands, no seconds hand |
| Movement | Hand-wound P.3000, 16.5 lignes (37.4 mm), 5.3 mm thick, 21 jewels, two barrels, 21,600 vph, 72 hours, hour hand set independently |
| Strap | 26/26/4 mm leather strap, with a second strap and a screwdriver supplied; curved brushed buckle |
| Water resistance | 100 metres |
Dial 1 described
The dial is black, with a fine matt, micro-bead finish that can look dark brown in strong light. It is a sandwich construction with only the hour markers and the words Luminor Panerai.
Black sandwich dial, engraved
The numerals 12, 3, 6 and 9 are in Panerai's characteristic font, with eight straight markers at the other hours. The words Luminor Panerai are engraved into the dial below 12 o'clock rather than printed, in an older typeface than the modern one, and filled with ecru paint like the markers. The dial recalls the vintage 6512 and 6152. There is no seconds subdial and no date.
- Luminor Panerai engraved, not printed
- tan paint on numerals and markers
- no seconds subdial
- matt micro-bead black surface
Luminous material 1 described
The luminous paint is tan on the numerals, the markers and the hands, giving an aged look. The vintage 6152/1 it is compared with has mint-green lume.
Tan lume
Numerals, the eight straight five-minute markers and the hands all carry tan paint, which reads as a deliberate aged colour. The engraved text is filled with the same paint. This differs from the green lume of the vintage watch it echoes.
- tan numerals and markers
- tan-filled dial text
Hands 1 described
The watch has hour and minute hands only.
Gold-toned double pencil hands
The hands are gold-toned to match the tan dial paint. At its 2011 showing one collector found the double pencil hands a little short and expected a change on later production, but the literature records no such change.
- gold-toned hour and minute hands
- no seconds hand
Case 2 described
The case is 47 mm, measured without the crown guard, and polished throughout except for the crown device.
47 mm polished cushion case
Unlike the earlier brushed Luminor 1950, the case and bezel are fully polished, and the shape is a slimmer cushion nearer to the Radiomir, with slimmer lugs that leave the middle of the case. About 16 mm to 16.4 mm high, it is much lower than the vintage 6152/1, which is given as 19.1 mm. The reference number is placed between the lugs, as on the vintage watches.
- fully polished case and bezel
- flat lugs from the middle of the case
- reference number between the lugs
Crown guard, brushed
The device protecting the crown is brushed steel, contrasting with the polished case, and carries trademark engraving including REG. T.M. on its upper side. That engraving was inspired by the BREV. ITAL. marking on a vintage guard.
- brushed crown guard with REG. T.M.
Crystal 1 described
The front crystal is Plexiglas, a deliberate choice for vintage character, with a sapphire back.
Domed Plexiglas, 3 mm
The front is 3 mm thick and highly domed, distorting the dial at some angles and adding to the watch's height. It scratches easily but can be polished out. The related PAM422 uses sapphire instead.
- domed acrylic with visible distortion at angles
Movement 1 described
The movement is the in-house P.3000, hand-wound and time-only.
P.3000
The P.3000 is 16.5 lignes (37.4 mm) across and 5.3 mm thick, with 21 jewels, a Glucydur balance, Incabloc and 160 components. Two barrels in series give 72 hours at 21,600 vph. Pulling the crown to its second position moves the hour hand alone. It is seen through a sapphire back engraved OFFICINE PANERAI BREVETTATO in historically styled lettering, with two broad brushed bridges.
- sapphire back showing two brushed bridges
- OFFICINE PANERAI BREVETTATO engraving
Bracelet 1 described
The watch is supplied on straps, not a bracelet.
26 mm leather strap
The standard strap is straight 26/26/4 mm in dark reddish-brown or tobacco leather, as on the 6152 of 1954, with a removable curved brushed Pre-V buckle. A second honey-coloured strap and a tool for changing straps are supplied.
- straight 26 mm strap
- brushed Pre-V buckle
Originality
- The front crystal is 3 mm, highly domed Plexiglas; a sapphire crystal belongs to the PAM00422, not this reference. Plexiglas scratches easily, though light scratches can be polished out.
- The tan lume and ecru dial text are designed to look aged; a bright white or green tone would not match.
Names
- Fiddy base. Collectors wanted a plain time-only version of the 2002 Luminor 1950, nicknamed the Fiddy.
- 372. Short form of the reference number.
Where accounts differ
Points on which the published literature and the library's own records do not agree, or on which the literature contradicts itself.
- Limited or regular production. Published accounts describe the watch as regular production rather than a limited edition, made in runs given as about 3,000 pieces, 3,500 in 2012, or about 2,000 a year. Some auction descriptions in the library's records nonetheless call it a limited edition, and give individual watches numbers out of 2,500, 3,000 or 3,500.
In the records
Counted from 38 listings at 16 holders between 21 May 2014 and 14 November 2026. These are what sellers and auction houses state, not measurements.
Not on the scale: 1950 (4). A year more than ten from all the rest is usually a model name or a founding date, not the year of the watch.
Case metal
| Steel | 21 |
Dial colour
| Black | 19 |
Case size
| 47 mm | 20 | |
| 46 mm | 1 | |
| 48 mm | 1 |
Calibre named
| P3000 | 12 |
Bracelet or strap
| Leather strap | 14 | |
| Rubber strap | 2 | |
| Metal bracelet, kind not stated | 1 |
Each table counts the listings that state the thing, in the seller's own terms. A size, metal, colour or calibre that cannot belong to this reference is a seller's slip or a listing filed under the wrong number.











































































































































