The PAM00111 is a Luminor Marina in a polished 44 mm steel case with a black dial. Published accounts date the early watches, of the E, F and G series from 2002 to 2005, with a printed dial, and those from 2006 with a sandwich dial. An owner's account adds an unusual small seconds sub-dial and a polished silver-toned case, and a factory strap that takes on wear marks. The library's records add that sellers state it as hand-wound, mostly on leather or rubber. Nothing in the literature dates a change in the case.
25 watches, oldest first, each straightened and cut the same way so that one row shows one component across them all. Chosen from 110 photographs on file for sharpness and for a face typical of the reference. A year marked c. is one its holder gives only roughly. Each picture is a detail cut from a listing photograph. Select the small mark in its corner for its year, its holder, a link to the listing it came from, and a way to report it.
Black, with a small seconds sub-dial; printed numerals and markers to 2005, sandwich construction from 2006
Movement
Hand-wound, on a Unitas 6497 base; published accounts name it calibre OP XI, one OP X
Strap
Leather or rubber, the factory strap on the owner's watch; one record shows a metal bracelet
Dial 2 described
The dial changed during the run. Watches of the E, F and G series, from 2002 to 2005, have a black dial with printed numerals and markers; from 2006 the dial is of sandwich construction, with the numerals and markers cut out of the top plate over a luminous lower disc. Sellers describe it as black.
Sandwich dial, black
from c. 2006
From 2006, after the G series, the dial is built in layers: a black top plate with cut-out numerals, markers and small seconds over a luminous lower disc. Sellers describe the dial as black.
numerals cut out of the dial
lume visible beneath the cut-outs
Printed dial, black
c. 2002–2005 E, F and G series
The early watches of the E, F and G series have a flat black dial with the numerals and hour marks printed on it rather than cut out. The movement of these early watches also differs in finish.
printed numerals on a flat dial
no cut-outs
Subregisters 1 described
A small seconds sub-dial sits at 9 o'clock; the owner's account calls it unusual.
Small seconds sub-dial
undated
A small seconds sub-dial at 9 o'clock, cut out of the top plate on the sandwich dial; its size is not given.
Case 1 described
A polished steel case of 44 mm, the size sellers state.
Polished steel, 44 mm
undated
Polished silver-toned steel; the literature gives no further case detail.
polished steel case
Bracelet 1 described
The watch is described as sold on a factory strap that picks up wear marks and a patina.
Factory strap
undated
Leather or rubber; wear marks show where the band meets a desk or the wrist.
Where accounts differ
Points on which the published literature and the library's own records do not agree, or on which the literature contradicts itself.
Calibre. Most published accounts name the hand-wound movement OP XI, built on the Unitas 6497-2; one serial-number guide names it OP X on a 6497 base.
In the records
Counted from 57 listings at 15 holders between 13 June 2012 and 13 November 2026. These are what sellers and auction houses state, not measurements.
2000listings by year of manufacture, as sellers state it; the tallest bar is 6, in 20102015
The fainter bar is the one listing outside the main run of 2000–2014 (the middle nine-tenths): the latest is 2015. It is an early or late example, or a seller's slip. The head of the page gives 2003–2015: the years that listings from two holders bear out.
Case metal
Steel
35
Dial colour
Black
24
Case size
44 mm
39
Bracelet or strap
Leather strap
13
Rubber strap
13
Metal bracelet, kind not stated
1
Each table counts the listings that state the thing, in the seller's own terms. A size, metal, colour or calibre that cannot belong to this reference is a seller's slip or a listing filed under the wrong number.