ALT1 pilot and aviation chronograph family
ALT1 names a family, not a single watch: Bremont's line of 43 mm steel chronographs, which began with the maker's first collection in 2007, and its watches are told apart by sub-references such as ALT1-C (classic), ALT1-P and ALT1-P2 (pilot), ALT1-Z and ALT1-ZT (Zulu GMT), ALT1-WT (world timer) and ALT1-B (blacked-out GMT). All use the three-part Trip-Tick case, about 16 mm thick and 100 m water resistant, and a chronometer-rated automatic movement from the BE-50, 53 and 54 series, based on the ETA Valjoux 7750 family. The ALT1-P and ALT1-C date from the start; later dials, hands, cases and special editions were added up to 2020. Collectors look first at the sub-reference suffix and the dial.

- Made
- from 2007dates approximate
- Seen in the library
- 2015–2020by years sellers state
- Case
- 43 mm · steelas sellers state
- Movement
- Automatic
- On record
- 39 listings20 photographs · 8 holders
Components
1 watch, oldest first, each straightened and cut the same way so that one row shows one component across them all. Chosen from 20 photographs on file for sharpness and for a face typical of the reference. A year marked c. is one its holder gives only roughly. Each picture is a detail cut from a listing photograph. Select the small mark in its corner for its year, its holder, a link to the listing it came from, and a way to report it.
| undated | |
|---|---|
| Face | ![]() |
| Signature at twelve | ![]() |
| Register at nine | ![]() |
| Register at three | ![]() |
| Register at six | ![]() |
| Hands | ![]() |
| Bezel at twelve | ![]() |
| Crown and pushers | ![]() |
| Lug | ![]() |
Chronology
The literature puts the ALT1-C and ALT1-Z in the first collection of 2007 and carries the family to new models in 2020, with no end given; the library's records hold few stated years.
Every dated variant: what is written, and what the records show
For the reference the marks are every dated watch; for a variant, the watches a seller names as that variant, so a variant sellers do not name has none.
Specification
| Case | 43 mm steel Trip-Tick case in three parts: a hardened steel bezel and lugs with sapphire crystal, a central barrel with a DLC treatment (black aluminium on one model), and a sapphire display back; about 16 mm thick, about 49 to 51 mm lug to lug, 22 mm lugs |
| Crystal | Slightly domed sapphire with anti-reflective coating; sapphire caseback, smoked on the ALT1-P2 JET |
| Movement | Chronometer-rated automatic Bremont calibres based on the ETA Valjoux 7750 family: BE-50AE (two registers), BE-53AE (three registers) and BE-54AE (with a 24-hour hand); 28,800 vibrations an hour, 42-hour reserve, Glucydur balance, Anachron balance spring, Nivaflex 1 mainspring; 25 jewels given for the BE-54AE; moulded rotor, skeletonised on the BE-54AE |
| Water resistance | 100 m |
| Strap | Leather strap on a steel pin or deployant buckle, or a three-link bracelet on some models |
Reference 10 described
ALT1 is the family name, and each watch carries a sub-reference. The suffix after a slash or hyphen gives the dial colour or strap: published reference lists code BK black, BL blue, WH white, CR cream and DG green on the ALT1, and on other Bremont lines AN anthracite, SI silver and RG rose gold, with a trailing br marking a bracelet. Sellers' titles also show AN, SI, RG and BR on ALT1 watches, and some add a number such as 07 that the literature does not explain. The sub-references below are those the literature describes.
ALT1-C
The classic chronograph and one of the first models, in the first collection. It has two registers, running seconds at 9 and a 30-minute counter at 3, a date window set a few millimetres above a missing 6, and the BE-50AE movement. One ALT1-C/AN/07 in the library's records has the case number C/0335; a single watch does not show how all are numbered.
- registers at 9 and 3
- date window near 6, with no 6 numeral
ALT1-C Rose Gold Classic
The ALT1-C in an 18 ct rose gold case with a black PVD case barrel and an off-white dial with Arabic numerals, blackened steel hands and recessed circular-grained registers. It was announced as a non-limited watch made in small numbers, about 65 in 2013, and available from November that year.
- rose gold case
- off-white dial
- black barrel
ALT1-C/PB
A dress-leaning ALT1-C with a polished steel case and a black dial. It has gold-toned nickel-plated Arabic numerals polished to a cabochon effect, feuille hands, dark grey recessed registers and a bevelled date window. It was announced ahead of Baselworld 2016 as the least expensive dress chronometer of the line, due in April.
- gold-toned cabochon numerals
- feuille hands
- black dial
ALT1-C Griffon
A homage to the last Spitfire, the Mark XIX with the Rolls-Royce Griffon engine. It has a matte black dial with pale gold printed registers and seconds track, gauge-style Arabic numerals and pointed baton hands, with the BE-50AE and a rotor cut out in the pattern of engine parts. It was announced in 2020 on a brown leather strap or a three-link oyster-style bracelet.
- pale gold printed accents on black
- pointed baton hands
ALT1-P
The pilot's chronograph, in the catalogue from the start. It was later given new dials, new hands and a new case without the internal rotating bezel and the crown at 8 that worked it, to improve legibility with larger luminous hands. The size stayed at 43 mm and the chronometer-rated automatic movement, named BE-53A at that update, has a Valjoux 7750 base. The update brought blue, black and, for the first time, cream dials.
- no crown at 8 on the updated watch
- large luminous hands
ALT1-P2 JET
A three-register pilot's chronograph with a third register at 6 and the date at 4:30 on the BE-53AE (a revised ETA 7753). The JET of 2020 is the first in the ALT1-P group in a black DLC steel case, with a smoked bevelled sapphire back, a black dial with sand-coloured numerals, '51 lume, broad sword hands, a black date wheel and a red ring on the lollipop seconds hand. It was tested on a jet-powered flight suit and followed the earlier blacked-out JET. Plain steel ALT1-P2 watches with more traditional dial colours also exist; the literature does not date them.
- black DLC case
- sand-coloured lume
- smoked caseback
- date at 4:30
ALT1-Z
The original Zulu GMT chronograph of the first collection, with a military look, bold Arabic numerals and a sub-dial inspired by an altimeter, and the BE-54AE movement with an independent 24-hour hand.
- bold Arabic numerals
- altimeter-style register
ALT1-ZT and ALT1-ZT/51
A quieter redraw of the Zulu with a matte black dial, small applied trapezoidal markers and white print, with red limited to the seconds register, the chronograph tip and the GMT arrow. The case is 16.4 mm thick and about 50 mm lug to lug, and a 24-hour internal bezel is set with a crown on the left flank. The ZT/51 was announced beside it with vintage styling taken from the sold-out P-51 limited edition.
- matte black dial with trapezoidal markers
- red limited to three details
ALT1-WT World Timer
A world timer chronograph with a rotating internal city bezel set by the crown at 8 with a click for each position, a globe drawn on the dial, and the BE-54AE with a world-time module. It comes in black and white with red accents, and blue with yellow accents, on bracelet or strap.
- city ring
- globe line drawing
- crown at 8
ALT1-B
A blacked-out GMT chronograph based on a watch made for pilots of a stealth bomber. The case is fully DLC, with a matte black dial and cool grey and red print, registers at 12, 6 and 9, a 24-hour ring with the GMT hand, an internal bezel set from the crown at 8, and matte black sword hands. Case 43 by 51 by 16 mm, with a black rotor in red lettering. Three Kingsman special editions with the same design, in rose gold, steel and blacked-out, were made for a film.
- all-black DLC case
- three registers at 12, 6 and 9
- red triangle at 0/60
Dial 4 described
Dials differ by sub-reference. Most use matte black, with printed Arabic numerals and an inner chapter ring, circular-grained recessed registers and a date window near 6 or at 3.
Matte black dial with gold-toned accents
The ALT1-C/PB and the Griffon use a matte black dial with gold-toned detail, polished on the PB and printed pale gold on the Griffon.
- gold-toned numerals
Black dial with sand lume and red details
The ALT1-P2 JET has sand-toned numerals and markers and red accents on a black matte dial; the lume is filled generously.
- sand-toned numerals
- red accents
Globe dial
The ALT1-WT has a fine line drawing of the globe as the dial background, and silver-white rings round the registers.
- globe on the dial
Blue, cream and white dials
Dial colours include blue, white and cream: the update of the ALT1-P brought blue, black and, for the first time in that range, cream dials, and the world timer comes in blue and white as well as black.
Luminous material 2 described
'51 lume
A sand-toned luminous paint that Bremont calls '51, used on the ALT1-P2 JET to give an aged look in place of white or green.
- beige lume
White-in-daylight lume
The ALT1-ZT uses a lume that is white in daylight and glows blue in the dark, less bright and shorter-lived than green lume.
- white lume that glows blue
Hands 3 described
Feuille hands
The ALT1-C/PB has nickel-plated, polished feuille hands with luminous fill that reach the hour markers and the chapter ring. Similar hands were on earlier ALT1-C watches, but not in so refined a form.
- feuille hands
Baton hands
The Griffon has pointed baton hands in the manner of an early chronograph.
- pointed baton hands
Sword hands
The ALT1-P2 JET has broad military sword hands, and the ALT1-B has straight matte black swords with lume. On the ALT1-WT, the GMT hand has a luminous arrow and the chronograph hand a solid red arrow.
- sword hands
Subregisters 2 described
Two registers at 9 and 3
The ALT1-C uses running seconds at 9 and a 30-minute totaliser at 3, with the hour counter of the original ETA movement dropped.
- two registers
Three registers
The ALT1-P2 on the BE-53AE adds a third register at 6 and moves the date to 4:30. The ALT1-B has registers at 12, 6 and 9, for the 30-minute counter, the 12-hour counter and running seconds.
- third register at 6
Bezel 1 described
Internal rotating bezel with Roto-Click
The ALT1-WT, ALT1-ZT and ALT1-B have an inner bezel turned by a crown on the left side, with a click for each half-position. The ALT1-P later lost its inner bezel and the crown at 8.
- second crown at 8
Case 1 described
Trip-Tick case
A three-part construction with a hardened steel bezel and back, to about 2,000 Vickers, and a central barrel that is textured or ribbed and DLC-coated. The ALT1-C/PB has a polished steel case, the Rose Gold Classic is in 18 ct rose gold with a black PVD barrel, and the ALT1-B and ALT1-P2 JET are fully black DLC.
- ribbed DLC barrel
- hardened bezel and caseback
Crown and pushers 1 described
Crown and pushers
The watches with an inner bezel have a second crown at 8 for setting it. On the ALT1-P2 JET the date is advanced with a pusher set into the case side, which published accounts place at 10 o'clock or at 8; the 7753 has no quick-set.
- second crown at 8
Date 1 described
Date position
On the ALT1-C the date window sits near 6, narrow and bevelled; on the ALT1-WT and ALT1-B it is at 3; on the ALT1-P2 it is at 4:30.
- date near 6 or at 3 or at 4:30
Movement 3 described
BE-50AE
A modified Valjoux 7750 base with two registers, used on the ALT1-C line, with perlage, blued screws and a moulded rotor engraved with the maker's name.
- blued screws
- engraved rotor
BE-53AE
A modified ETA Valjoux 7753, three registers and a date at 4:30, with the date set by a pusher in the case side.
- three registers
BE-54AE
A modified ETA 7754 with a 24-hour hand, used on the ALT1-Z, WT, ZT and B; 25 jewels, 28,800 vibrations an hour, 42-hour reserve, blued screws and a DLC skeletonised rotor.
- 24-hour hand
Bracelet 1 described
Straps and bracelets
The usual choice is a leather or alligator strap with a buckle engraved with the name and the propeller logo, or a deployant clasp. A three-link oyster-style bracelet and a DLC bracelet, with end links, are offered on some models.
- propeller logo on the buckle
Originality
- The literature gives nothing on replaced parts; straps and bracelets change often, and the bracelet with end links fits the case differently from one without.
Names
- Zulu. The ALT1-Z shows a 24-hour hand for Zulu time, another name for UTC.
- JET. The ALT1-P2 JET was named for a jet-powered flight suit it was tested on.
Where accounts differ
Points on which the published literature and the library's own records do not agree, or on which the literature contradicts itself.
- Date pusher of the ALT1-P2 JET. One account puts the date-adjustment pusher at 8 o'clock; another puts the inset pusher at 10 o'clock and says the movement has no quick-set date.
- Calibre names and bases. The ALT1-P update is given the BE-53A on a Valjoux 7750 base, while the ALT1-P2 JET is given the BE-53AE as a revised ETA 7753. The BE-54AE is described as a 7750 with a world-time module in one account and as a modified ETA 7754 in others.
Catalogue versions 16 listed
The full numbers under which holders list this reference, with what their listings say of each. Each has a page of its own.
| Version | Metal | Dial | Years seen | Records |
|---|---|---|---|---|
| ALT1-P2/BK thin | 5 | |||
| ALT1-C/SI/07 thin | 4 | |||
| ALT1-C/BK thin | 3 | |||
| ALT1-P/BL thin | 3 | |||
| ALT1-ZT/51 thin | 3 | |||
| ALT1-B/BK thin | 2 | |||
| ALT1-C/AN thin | 2 | |||
| ALT1-C/BL thin | 2 | |||
| ALT1-C/AN/07 thin | Steel | 1 | ||
| ALT1-C/CR thin | 1 | |||
| ALT1-C/PB thin | 1 | |||
| ALT1-C/RG thin | 1 | |||
| ALT1-C/SI/BR thin | 1 | |||
| ALT1-C/WH-BK thin | Steel | White | 2019 | 1 |
| ALT1-P2-JET-R-S thin | 1 | |||
| ALT1-WT/WH thin | 1 |
In the records
Counted from 39 listings at 8 holders between 11 September 2012 and 14 November 2026. These are what sellers and auction houses state, not measurements.
The head of the page gives 2015–2020: the years that listings from two holders bear out.
Case metal
| Steel | 5 |
Dial colour
| Black | 1 | |
| Silver | 1 | |
| White | 1 |
Case size
| 43 mm | 4 | |
| 37 mm | 1 |
Bracelet or strap
| Leather strap | 3 |
Each table counts the listings that state the thing, in the seller's own terms. A size, metal, colour or calibre that cannot belong to this reference is a seller's slip or a listing filed under the wrong number.








