BR 01 Instrument (46 mm), model line
The BR01 is the 46 mm square Bell & Ross watch shown at Baselworld in 2005, drawn from a cockpit clock, with a round dial and a screw at each corner of the case. This entry covers the line, not one reference: the sub-references BR01-92 (three hands), -93 (GMT), -94 (chronograph), -96 and -97 are treated as its variants. The line grew through carbon, titanium, gold, tourbillon, instrument-dial and skull editions, and the skull editions were still being made in 2023. The literature lists many models but dates most of them only by the year of their announcement.

- Made
- from 2005dates approximate
- Seen in the library
- 2005–2020nine in ten in 2006–2020 · by years sellers state
- Case
- 46 mm · steel (76%)as sellers state
- Movement
- Calibre 2894automatic
- On record
- 51 listings51 photographs · 17 holders
Components
8 watches, oldest first, each straightened and cut the same way so that one row shows one component across them all. Chosen from 51 photographs on file for sharpness and for a face typical of the reference. A year marked c. is one its holder gives only roughly. Each picture is a detail cut from a listing photograph. Select the small mark in its corner for its year, its holder, a link to the listing it came from, and a way to report it.
Chronology
The launch at Baselworld 2005 is firm; no end date is given because skull editions were announced as late as 2023 (see Where accounts differ).
Every dated variant: what is written, and what the records show
For the reference the marks are every dated watch; for a variant, the watches a seller names as that variant, so a variant sellers do not name has none.
Specification
| Case | 46 mm square, 316L steel (also titanium, ceramic, carbon fibre, gold and bronze); four screws at the corners, thin at about 10 mm |
| Crystal | Sapphire, anti-reflective |
| Crown | Screwed; offset toward the top of the side on the Airborne |
| Caseback | Heavily engraved, no display |
| Movement | Automatic ETA 2892 (three hands), 2893 (GMT), 2894 (chronograph); ETA-based automatic BR-CAL.302 on the Burning Skull; hand-wound on the tourbillons, the Laughing Skull (BR-CAL.206) and the Cyber Skull Bronze (BR-CAL.210) |
| Water resistance | 100 m |
| Strap | Rubber, leather or synthetic canvas |
Reference 20 described
The sub-references share one case and differ by function: -92 for three hands, -93 for GMT, -94 for chronograph, -96 and -97 for the Commando and Climb. Beyond them sit a long run of limited and themed editions, listed here in order of announcement.
BR01-92 (three-hand)
The base model of the line: a 46 mm square case with hours, minutes and seconds, in carbon-finished steel or ceramic. The dial is black with large white numerals or the reverse. The simplest form, the BR01 Carbon, carries no date; a date window is found on other versions between four and five o'clock.
- 46 mm square case
- large white numerals on black
BR01-94 chronograph
The chronograph, in the same 46 mm case, with three subdials (60 seconds, 30 minutes, 12 hours), rectangular pushers, a textured crown and a round date window between four and five. Cases are steel or titanium, on a Swiss ETA 2894 automatic.
- three subdials
- rectangular pushers
- date between 4 and 5
BR01 Orange and BR01 Pink Gold and Carbon
Early coloured and gold versions announced soon after the launch: a BR01-92 in satin 18-carat pink gold with microblasted 316L steel in a black vacuum-carbon finish (late 2005), and an Orange version in March 2006. The literature gives no more detail on the Orange.
BR01 Titanium chronograph
A chronograph in an ultralight titanium case announced in March 2006. Titanium and steel cases were later both offered on the -94.
- titanium case
BR01 Tourbillon
A hand-wound tourbillon announced in April 2007, the brand's move into high watchmaking. A later version from November 2008 came in all gold and in two-tone with a black or silver dial, with carbon-fibre plates and a black gold cage (black dial) or aluminium plates (silver dial).
BR01 Pro (Titanium, Carbon)
The Pro form appeared around 2008, and an all-carbon-fibre case followed in 2009. The titanium BR01-94 Pro with a carbon-fibre dial combines the two, with an ETA 2894 chronograph. The dial treatment was also made on the three-hand BR01-92.
- carbon-fibre dial
- raised bezel with a second square turned 45 degrees
BR01-93 GMT
Announced in April 2009. The case matches the BR01-92, but the dial has a flange ring carrying the 24-hour scale and a large orange GMT hand with lume in its middle. It uses the ETA 2893-2, has the date between four and five, and sits in a matte black PVD case about 10 mm thick, rated to 100 m. The 24-hour scale has no lume.
- orange GMT hand
- 24-hour flange ring
BR01-96 and 97 Commando
Announced in June 2009 for elite units. The BR01-97 Commando has a power-reserve display; sellers describe the BR01-96 as a Grande Date. The literature is otherwise brief.
BR01 Airborne
Shown at Baselworld 2009 as a tribute to US airborne troops: a full-black edition of 500 with a photoluminescent black skull on the dial. Four bones link the cardinal points. The hours are claws and the hands are a knife (hour) and a sabre (minute). The case is microblasted 316L steel with a black vacuum-carbon finish and a screwed crown set offset toward the top third of the side. Movement is the ETA 2892.
- skull on the dial
- bones joining the four cardinal points
- claw hour markers
- sword and dagger hands
BR01 Airborne diamonds, Airborne II, Tourbillon Airborne
The skull model was extended in 2009 with diamond-set versions, and in 2010 with a Tourbillon Airborne of 20 pieces, hand-wound with carbon-fibre plates. An Airborne II followed in 2015.
BR01 Radar and Red Radar
Radar, announced in March 2010, takes its way of reading time from an aircraft radar display; a Red Radar followed in 2011.
BR01-92 Compass
Announced in August 2010, after the Radar, with a dial inspired by the aircraft compass.
BR01 Casino
A one-off BR01 Casino Pink Gold was made for the Only Watch auction in 2011, a nod to the Monaco casino where the sale was held. Listings also show Casino editions in steel and in 18-carat pink gold with carbon fibre, the latter described as a limited edition.
BR01 Horizon, Altimeter, Turn Coordinator
Three instrument dials from 2012. The Altimeter uses its window at three o'clock for the date. The Turn Coordinator has two concentric discs, one for 12 hours and one for 60 minutes, under a glass with a white marker. The Horizon completes the set with the Compass and Radar.
BR01 Heading Indicator, Airspeed, Climb
Three more from 2013, each limited to 999, with the first 99 of each sold only in a collector's box that also holds the three of 2012. The Heading Indicator shows the time on three rotating discs (hours with W, E, S and N, minutes, seconds) and a yellow plane engraved under the sapphire, on an ETA 2892-A2. The Airspeed puts hours at the centre, minutes and seconds on separate rings, with a coloured ring marking the quarter hour. The BR01-97 Climb copies a vertical speed indicator, with a power-reserve display with up and down arrows on an ETA 2897-based movement; of the three it alone has a date, at 3 on a black disc.
- rotating discs
- coloured quarter-hour ring (Airspeed)
BR01 Skull Bronze, Patine 1120
The Skull Bronze of 2015 was the first skull model in a bronze case, limited to 500, with the case developing a patina. A one-off tourbillon version of it was made for Only Watch. The Patine 1120 was made for the retailer Chronopassion in 50 pieces, with an artificially aged bronze case, a verdigris-grey skull, gold hands with black patina, and a crown offset so the hand axis sits at the centre of the skull.
- bronze case that ages
- grey-green skull
BR01 Burning Skull
Introduced in 2016: a 500-piece edition in microblasted steel engraved on the case with flames and bones, and tattoo motifs (heart, rose, scythe, hourglass) at the four corners, the engraving filled by hand with black lacquer and fired. The dial skull is stamped metal on two levels over a matte black ground whose black areas carry lume. A bronze Burning Skull followed in 2017.
- engraved case with flames
- skull in two levels
BR01 Laughing Skull
Shown in 2018 with a hand-wound BR-CAL.206 whose plate and bridges form a skull and whose jaw moves when the watch is wound. It has a 46 mm microblasted steel case with a Clou de Paris finish, skeletonised lume hands and a brown alligator strap. It was limited to 500; two jewelled editions of 99 also exist. A Full Diamond version is listed.
- moving jaw when wound
BR01 Cyber Skull
Launched in 2020 as a faceted, angular skull inspired by stealth aircraft and origami. A Bronze version of 500 followed at Watches and Wonders 2023, with case, crown and buckle in bronze, a gold-coloured skull and a hand-wound BR-CAL.210 with a moving jaw; the skull floats between two sapphire plates. A Sapphire Ice Blue version followed late in 2023.
- faceted skull
- skull between two sapphire plates
BR01-92 Gold Ingot
A limited edition in solid 18-carat rose gold, with case, dial, numerals, crown and hands in gold, a Clos du Paris guilloche dial, and a black alligator strap.
- guilloché dial
Dial 4 described
The standard dial is black with large white numerals, or white with black numerals. Many editions replace it with an instrument layout, and the skull editions use a skull in place of the numerals.
Aviator dial
The standard layout: large numerals in white on black or in black on white, with the date, when fitted, between four and five. A minute hand that covers the hour markers is a feature of the GMT's flange dial.
- large numerals
Pro dial
A carbon-fibre or matte grey dial with oversized hands and markers heavy with lume, made on the -92 and -94.
Instrument dials
Radar, Compass, Horizon, Altimeter, Turn Coordinator, Heading Indicator, Airspeed and Climb each copy a flight instrument's layout for showing the time.
Skull dial
A skull replaces the numerals: black photoluminescent on the Airborne, stamped metal on two levels on the Burning Skull, and a metal skull whose jaw moves when the watch is wound on the Laughing Skull and the Cyber Skull Bronze.
Hands 2 described
Hands are large and lume-filled on the aviator dial; the GMT hand is orange; skull editions use knife and sabre shapes.
Orange GMT hand
Large, with lume in its middle section; the 24-hour scale is not lumed.
- orange hand
Sabre and knife hands
Hour hand as a knife, minute hand as a sabre, on the Airborne and later Skull editions.
- sword and dagger shapes
Subregisters
The BR01-94 has three subdials, for 60 seconds, 30 minutes and 12 hours.
Bezel 1 described
The standard BR01 has a flat bezel; the Pro has a raised bezel with an extra square turned 45 degrees.
Pro bezel
Raised, with a second square set at 45 degrees with cut corners and sharp angles, and brushed surfaces.
- square rotated at 45 degrees
Case 3 described
The case is a 46 mm square with a round dial opening and one screw in each corner. The case is one piece: the bezel lifts out with the dial and movement. The screws are functional and the lugs sit close to the base of the case.
316L steel, carbon finish
The standard case: microblasted steel, often with a black vacuum-carbon finish.
Other materials
Titanium and ceramic, a 100 per cent carbon-fibre case (2009), 18-carat gold and bronze are all recorded. Bronze cases keep a steel or titanium back.
Engraved Burning Skull case
The case top is engraved with flames and bones and filled with black lacquer by hand.
Crown 1 described
The screwed crown is textured on the chronograph. It is offset toward the upper third of the side on the Airborne.
Offset crown
Set in the first third of the case side, on the Airborne and the Patine 1120, to place the hands' axis in the centre of the skull.
- crown set high on the side
Crystal
Sapphire with anti-reflective treatment, double-coated on the GMT. On the Patine 1120 the crystal carries gold claw indices applied to its underside.
Movement 7 described
Movements are ETA or ETA-based on the standard models and on the earlier skull editions, the Airborne and Burning Skull among them. The tourbillons are hand-wound, and the Laughing Skull and Cyber Skull Bronze carry hand-wound calibres made by the brand.
ETA 2892 / 2892-A2
Three-hand automatic; used in the -92 and the Airborne and the 2013 Heading Indicator and Airspeed.
ETA 2893-2
Automatic GMT, with quick one-hour adjustment of the hour hand; date between four and five. Used in the BR01-93.
ETA 2894
Automatic chronograph with 12-hour, 30-minute and 60-second counters and a date.
ETA 2897-based
In the BR01-97 Climb: with a power-reserve display.
BR-CAL.302
In the Burning Skull: ETA-based, 38 hours, 28,800 vph, hours and minutes.
BR-CAL.206
Hand-wound, in the shape of a skull, with a moving jaw; made by the brand for the Laughing Skull.
BR-CAL.210
Hand-wound in-house calibre with a skull automaton, in the Cyber Skull Bronze, with a balance at twelve.
Bracelet
Straps are rubber, leather or canvas; alligator on the dressier skull editions.
Names
- Skull. Collectors' name for the BR01 editions with a skull on the dial.
- Airborne. The skull model of 2009, a tribute to US airborne troops.
Where accounts differ
Points on which the published literature and the library's own records do not agree, or on which the literature contradicts itself.
- Whether the BR01 is still made. One account (2016) states that the maker has discontinued the BR01 and that it is found only second-hand. News items in two others record new BR01 skull editions in 2018, 2020 and 2023, and sellers in the library's records give years up to 2023.
- Year of the Skull Bronze Tourbillon. One account puts the one-off Skull Bronze Tourbillon for Only Watch in 2016; another places it in 2015, and a news item of July 2015 presents it for Only Watch 2015.
Catalogue versions 13 listed
The full numbers under which holders list this reference, with what their listings say of each. Each has a page of its own.
| Version | Metal | Dial | Years seen | Records |
|---|---|---|---|---|
| BR01-94 | Steel | Black or white | 2011–2015 | 10 |
| BR01-92-SA thin | Steel | Blue | 2010–2011 | 2 |
| BR01-92-SHO-298/999 thin | 2008–2020 | 2 | ||
| BR01-97 thin | 2010 | 2 | ||
| BR01-92-S-00555 thin | Black | 2005 | 1 | |
| BR01-92-S/R thin | Steel | 1 | ||
| BR01-92-STADL thin | Titanium | 2020 | 1 | |
| BR01-92-STC thin | 1 | |||
| BR01-93 thin | 2015 | 1 | ||
| BR01-94-SRED thin | Steel | Black | 2010 | 1 |
| BR01-96 thin | Steel | 1 | ||
| BR01-96-S-01359 thin | Steel | Black | 1 | |
| BR01-CM-203-B-P-021 thin | 1 |
In the records
Counted from 51 listings at 17 holders between 14 December 2011 and 14 November 2026. These are what sellers and auction houses state, not measurements.
Fainter bars are the 2 outside the main run of 2006–2020 (the middle nine-tenths): the earliest is 2005 and the latest 2023. They are early and late examples, and now and then a seller's slip. The head of the page gives 2005–2020: the years that listings from two holders bear out.
Case metal
| Steel | 16 | |
| Pink gold | 2 | |
| Titanium | 2 | |
| Bronze | 1 |
Dial colour
| Black | 8 | |
| Silver | 1 | |
| Skeleton | 1 | |
| White | 1 | |
| Blue | 1 |
Case size
| 46 mm | 16 |
Calibre named
| 2894 | 3 |
Bracelet or strap
| Leather strap | 12 | |
| Rubber strap | 3 | |
| Strap, kind not stated | 2 |
Each table counts the listings that state the thing, in the seller's own terms. A size, metal, colour or calibre that cannot belong to this reference is a seller's slip or a listing filed under the wrong number.











































































